Electronic Component Portfolio
Comprehensive semiconductor and passive-component solutions across all major categories and manufacturers.
Microcontrollers & Microprocessors
8-bit to 64-bit MCU and MPU solutions from the world's leading semiconductor manufacturers.
STM32 Series
STMicroelectronics STM32 family: Cortex-M0/M3/M4/M7/M33 cores. Extensive peripheral set, wide voltage range, industrial temp grade.
- STM32F0/F1/F2
- STM32F4/F7
- STM32G0/G4
- STM32L0/L4/L5
- STM32H7
i.MX Applications Processors
NXP i.MX series: ARM Cortex-A cores for embedded computing, HMIs, and edge AI. Linux/Android BSP support.
- i.MX 6 Series
- i.MX 8 Series
- i.MX RT Crossover
- i.MX 9 Series
RISC-V MCU Solutions
Next-generation open-architecture microcontrollers. Competitive performance-per-watt for IoT, AI acceleration, and embedded control.
- GD32VF103
- ESP32-C Series
- CH32V Series
- BL602/BL702
Classic 8051 & PIC
Proven 8-bit architectures for cost-sensitive and legacy applications. Wide availability, long lifecycle guarantee.
- Microchip PIC16/PIC18
- Silicon Labs EFM8
- Nuvoton 8051
- STC 8051 Series
Memory ICs
Volatile and non-volatile memory solutions: DRAM, SRAM, Flash, and specialty memory for all applications.
DDR4 / DDR5 SDRAM
High-speed DDR memory from Samsung, Micron, and SK hynix. Industrial temperature and automotive grades available.
- DDR4 4Gb-16Gb
- DDR5 8Gb-32Gb
- LPDDR4/LPDDR5
- Industrial Grade
NOR & NAND Flash
SPI/QSPI NOR Flash from Winbond, Macronix, and GigaDevice. eMMC and UFS NAND from Samsung and Micron.
- SPI NOR 1Mb-512Mb
- QSPI/OSPI NOR
- eMMC 5.1
- NAND SLC/MLC/TLC
Async & Sync SRAM
Low-power and high-speed SRAM for cache, buffer, and networking applications. Legacy and modern interface support.
- Async SRAM 256Kb-16Mb
- Sync SRAM QDR
- nvSRAM
- PSRAM
Serial EEPROM
I2C and SPI EEPROM from Microchip, onsemi, and ST. Industrial and automotive qualified, up to 2Mb density.
- I2C EEPROM 1Kb-2Mb
- SPI EEPROM
- Automotive AEC-Q100
- MicroWire EEPROM
Power Management ICs
DC-DC converters, LDOs, PMICs, battery management, and GaN/SiC gate drivers for efficient power delivery.
Switching Regulators
Buck, boost, buck-boost, and SEPIC converters from TI, MPS, and Analog Devices. Wide Vin range, high efficiency.
- Buck Converters
- Boost Converters
- Buck-Boost
- Module (Power Module)
Linear Regulators
Ultra-low dropout, low noise LDOs for sensitive analog circuits. Fixed and adjustable output, up to 3A.
- Ultra-Low Noise
- High PSRR
- Low Iq (<1uA)
- High Current LDO
Power Management ICs
Multi-rail PMICs for SoC/FPGA power sequencing. Integrated DC-DC converters, LDOs, and supervisory functions.
- SoC PMIC
- FPGA PMIC
- Automotive PMIC
- Battery Charger IC
Wide-Bandgap Drivers
Gate drivers and controllers for GaN FETs and SiC MOSFETs. High-frequency, high-efficiency power conversion.
- GaN Gate Driver
- SiC Gate Driver
- Half-Bridge Driver
- Isolated Driver
Analog & Mixed-Signal ICs
Precision analog, data converters, and RF components for sensing, measurement, and communication.
Operational Amplifiers
Precision, high-speed, low-noise, and zero-drift op-amps from TI and Analog Devices. Single to quad channel.
- Precision (<10uV)
- High Speed >50MHz
- Zero-Drift
- Rail-to-Rail I/O
ADC & DAC
SAR, delta-sigma, and pipeline ADCs. Precision and high-speed DACs for industrial control and instrumentation.
- 12-bit to 24-bit ADC
- SAR ADC
- Delta-Sigma ADC
- High-Speed DAC
RF Front-End ICs
LNAs, PAs, mixers, and transceivers for sub-6GHz, WiFi 6/7, BLE, and LoRa applications.
- Sub-6GHz RF
- WiFi FEM
- BLE SoC
- LoRa Transceiver
Interface ICs
RS-232/485, CAN, USB, I2C/SPI expanders, and isolation ICs for robust industrial communication.
- RS-485 Transceiver
- CAN Transceiver
- USB Bridge
- Digital Isolator
Logic & Specialty ICs
Standard logic, voltage translators, and specialty semiconductors for glue logic and system integration.
Gates, Buffers, Flip-Flops
Complete portfolio from Nexperia, Toshiba, and TI. AHC, LVC, and AUP families for voltage flexibility.
- AND/NAND/OR/NOR
- Buffers/Drivers
- D-Type Flip-Flops
- Schmitt-Trigger
Voltage Translators
Auto-direction sensing translators for mixed-voltage systems. 1-bit to 32-bit, up to 100Mbps data rate.
- 1.8V to 3.3V
- 1.2V to 5V
- I2C Level Shifter
- Multi-bit Translator
Clock & Timing ICs
Oscillators, clock generators, PLLs, and jitter cleaners for high-speed digital systems.
- MEMS Oscillator
- Clock Generator
- PLL / Synthesizer
- Jitter Cleaner
ESD & TVS Protection
ESD protection diodes, TVS arrays for USB, HDMI, and Ethernet interfaces. AEC-Q101 automotive qualified.
- USB ESD Protection
- HDMI ESD Protection
- TVS Diode Array
- AEC-Q101 Qualified
Passive Components
The non-semiconductor essentials every design relies on — capacitors, resistors, and protection devices that stabilize voltage, filter noise, and shield circuits from surges. Sourced across leading brands and offered in industrial and automotive grades.
Multilayer Ceramic (MLCC)
Class I (C0G/NP0) and Class II (X7R/X5R) ceramic capacitors in SMD and leaded formats. The default choice for decoupling, filtering, and high-frequency bypass.
- 0402 – 2220 sizes
- C0G / X7R / X5R
- 1pF – 100µF
- AEC-Q200 options
Film Capacitors
Metallized polyester and polypropylene film types for DC-Link, EMI suppression, and snubber networks. Self-healing and stable across temperature and voltage.
- X2 / Y2 EMI suppression
- DC-Link (MKP)
- Snubber networks
- PP / PET dielectric
Varistors (MOV)
Metal-oxide varistors that clamp transient overvoltage from surges, ESD, and lightning. Essential for surge protection in power supplies and outdoor equipment.
- Disc 05D – 20D
- Transient clamping
- Surge absorption
- AC/DC line protection
Thermistors (NTC / PTC)
NTC devices for temperature sensing and inrush-current limiting; PTC devices for self-regulating heating and overcurrent protection. Accurate and low-cost.
- NTC temperature sensing
- Inrush current limiting
- PTC self-regulating
- Overcurrent protection
Automotive-Grade Passives
AEC-Q200 qualified capacitors and resistors built for under-hood heat, vibration, and long-life automotive systems — from comfort electronics to onboard charging.
- AEC-Q200 qualified
- 125°C / 150°C rated
- Vibration resistant
- EV charging ready
Where They're Used
Passives sit in every system we support — motor drives, servo and industrial automation, EV charging, home appliances, AI-server power, telecom, renewable energy, and medical electronics.
- Industrial & motor control
- Automotive & charging
- Power & AI servers
- Renewable & medical
Can't Find What You Need?
Submit your BOM or part number. Our sourcing team will locate the components you need at competitive prices.
Submit RFQ